Laurence c32f00a2be Initial release v1.1.0 — ESP32 automated telescope flat panel ...

Firmware (Arduino Nano ESP32 / PlatformIO):
- Native ASCOM Alpaca CoverCalibrator REST API on port 11111
- Alnitak serial protocol on USB at 9600 baud (simultaneous with WiFi)
- MG995 servo cover mechanism with non-blocking state machine (D9)
- LED brightness PWM via IRLZ44N MOSFET, LEDC channel 0 (D3)
- 12V dew heater PWM via IRLZ44N MOSFET, LEDC channel 1 (D5)
- mDNS + UDP Alpaca discovery, WiFi watchdog reconnect
- SERIAL_DEBUG flag to silence debug output in USB-only mode

INDI driver (C++ / libcurl / nlohmann-json):
- WiFi mode: HTTP Alpaca via libcurl
- USB mode: Alnitak serial via POSIX termios
- LightBoxInterface + DustCapInterface + dew heater number property

Python controller (PyQt6):
- Dark-themed desktop app for direct manual control
- AlpacaBackend (requests) + AlnitakBackend (pyserial)
- PollWorker QThread; cover, brightness, dew heater panels
- QSettings persistence; auto serial port discovery

Docs:
- system-diagram.svg, wiring-diagram.svg (browser-renderable SVG)
- BUILD_NOTES.md with BOM, LM2596 calibration, power-on checklist
- WIRING.md quick-reference, README.md, CHANGELOG.md

2026-05-17 08:51:29 +01:00

313 lines

21 KiB

XML

Raw Permalink Blame History Unescape Escape

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.